1 Series E81 130i (N52K) 3-door
34 52 516
Removing and installing/replacing DSC
control unit
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove hydraulic unit.
Important!
Removing pump motor from valve block is not permitted!
Do not twist pump motor.
Important!
Secure provided retaining lugs (2) from repair kit for control
unit with aid of plugs (3).
Close off pipe connections with plugs (1).
RA Removing and installing/replacing DSC control unit
BMW AG - TIS
22.01.2013 06:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -