1 Series E81 130i (N52K) 3-door
37 14 511
Replacing front ride-height sensor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Release nut (1) and disconnect jointed rod (2).
Installation:
Tightening torque 37 14 3AZ
.
Release screws (4).
Remove ride-height sensor and disconnect plug connection (3).
Installation:
Sensor lever (5) must point from ride-height sensor to left front
wheel.
Tightening torque 37 14 1AZ
.
After installation:
•
Check headlight adjustment, correct if necessary
RA Replacing front ride-height sensor
BMW AG - TIS
22.01.2013 06:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
