1 Series E81 130i (N52K) 3-door
Installation:
Mount partial section for cavity acoustic baffle (1) before fitting
new part.
Apply window glass adhesive to cavity acoustic baffle.
Replace partial section for cavity acoustic baffle (2) after fitting
new part with 2-component foam.
Note:
Shown without side panel for purposes of clarity.
Preparation of new part:
Apply adhesive in areas (1).
Installation:
Adjust new part to fit with straightening attachment or universal
mount.
RA Replacing inside left side frame (B-pillar reinforcement)
BMW AG - TIS
22.01.2013 06:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -