1 Series E81 130i (N52K) 3-door
Pull liner* off trim (1).
Place bottom trim (1) on PVC moulding (2) according do
dimension (A).
A= 0.5
±
0.5 mm
Place top trim (1) on PVC moulding (3) according do dimension
(B).
B= 3.5
±
0.5 mm
Press down trim (1) with firm thumb pressure over entire
adhesive area.
*Liner is the protective film on adhesive tape.
RA Replacing trim on rear left or right side window
BMW AG - TIS
22.01.2013 07:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -