1 Series E81 130i (N52K) 3-door
51 43 060
Removing and installing/replacing armrest on
rear left or right side trim panel
Necessary preliminary tasks:
•
Remove rear side trim panel
E81/E82 only:
Release locking washers (1).
Remove sound insulation (2).
Installation:
If necessary, replace faulty lock washers (1).
Drill out welding spots (1) on side trim panel (2) with 8 mm dia.
welding spot drill bit.
Important!
Risk of damage!
Only drill down to side trim panel area (2) so as not to
damage the contact surface.
Remove welding residue from side trim panel (2) and armrest
with a scalpel (for heavy-duty applications) if these components
are to be reused.
Saw off welding pins (1) on armrest (2) down to
measurement (A).
A = 2
±
0.5 mm
RA Removing and installing/replacing armrest on rear left or right side trim panel
BMW AG - TIS
22.01.2013 07:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -