bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

45 Instrument Cluster Trim Panel > < 3 RA Removing And Installing Or Replacing Roof Liner (with Slide_tilt Sunroof)
Page 2
background image

Important!

The following tasks must be carried out with a second person
assisting:

Pass headliner (1) at front underneath steering wheel.

Tilt headliner (1) and pass between instrument panel and shift
lever towards front right (front passenger's side).

Remove headliner to passenger door.

Installation:

Following parts of headliner (3) must not be damaged or missing:

Mount (1) for front console

Mount (2) for rear console

Replacement with dividing net mount version:

Cut out premarked cutout area (1) for left/right dividing net
mounts with a scalpel.

Important!

Ensure a clean cut so that the headliner material is not
damaged on the inside.

Installation:

Installation sequence:

1. 

Secure roof liner with mucket

2. 

Insert front and rear expander rivets

3. 

Screw down grab handles at front on left/right

4. 

Screw down grab handles at rear on left/right

5. 

Screw down sun visors and counter supports

RA  Removing and installing or replacing roof liner (with slide/tilt sunroof)

BMW AG - TIS

22.01.2013  07:38

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

45 Instrument Cluster Trim Panel > < 3 RA Removing And Installing Or Replacing Roof Liner (with Slide_tilt Sunroof)