1 Series E81 130i (N52K) 3-door
Version with CCC/ASK:
Remove control panel for heater - A/C system.
Pull trim cover (1) inward to release from pin (2).
Detach trim cover (1) and disconnect plug connection.
Installation:
Make sure ribbon cable (1) is positioned correctly on trim cover
(2).
Replacement:
If necessary, remove centre console switch cluster (3)
Installation:
If necessary, replace faulty holders (1).
RA Removing and installing (or replacing from 03/2007) centre trim cover on dashboa
BMW AG - TIS
22.01.2013 07:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
