1 Series E81 130i (N52K) 3-door
51 47 491
Removing and installing/replacing rear
underbody protection
Warning!
Scalding hazard!
This work may only be carried out on an exhaust system
which has cooled down.
Single-part underbody protection (except E90/E91/E92 AWD):
Release screws (1).
Pull underbody protection (2) in direction of arrow out of
bracket (3).
Installation:
Ensure correct seating.
Centre underbody protection (2) and tighten down screws (1).
Single-part underbody protection (E90/E91/E92 AWD):
Release screws (1).
Remove underbody protection (2) downwards.
Installation:
Ensure correct seating.
Centre underbody protection (2) and tighten down screws (1).
Two-part underbody protection
Release screws (1).
Detach underbody protection (2) from bracket (3) and remove.
Installation:
Ensure correct seating.
Centre underbody protection (2) and tighten down screws (1).
RA Removing and installing/replacing rear underbody protection
BMW AG - TIS
22.01.2013 07:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
