1 Series E81 130i (N52K) 3-door
51 48 001
Removing and installing/replacing insulation
lining on hood/bonnet
Note:
Illustration created using the E87 as an example. There may be
differences in detail in the case of other vehicle models.
Release threaded rivets (1) on insulation lining (2).
Remove insulation lining (2).
Installation:
If necessary, replace defective threaded blind rivets (1).
RA Removing and installing/replacing insulation lining on hood/bonnet
BMW AG - TIS
22.01.2013 07:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
