1 Series E81 130i (N52K) 3-door
Note:
Position of butylene tape (1) on sound insulation (2).
Note:
A marking (2) is provided all round on the sound insulation (1).
Butylene tape (3) rests on or inside the marking (2).
Clean adhesive area on inner door panel with adhesive cleaner
(sourcing reference: BMW Parts Service).
Air drying time: 1 minute
Important!
Adhesive areas must be dry and free of dust and grease.
Once it has been cleaned, do not touch the adhesive area
with bare hands.
Lay 6 mm dia. butylene tape in a single row (sourcing reference:
BMW Parts Service) in specified adhesive area on acoustic
insulation.
Heat butylene tape (hot air blower) and press down firmly on
sound insulation all round.
Contact pressure with hand roller: approx. 30 N/cm
2
Manual contact pressure: approx. 10 N/cm
2
Note:
Firm thumb pressure has approx. 50 N/cm
2
RA Removing and installing/replacing sound insulation in left or right front door
BMW AG - TIS
22.01.2013 07:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
