1 Series E81 130i (N52K) 3-door
Installation:
Stop spring (2) must be situated before rear slide (1) during
installation of headliner.
Slide (1) must not be mounted on stop spring (2).
Performing function check:
•
Slides must have spring tension
•
Roofliner must not have any play in guide rails
•
Roofliner must be moveable in X-direction over springs
•
Roofliner springs back into central initial position
Note:
If headliner is difficult to move, apply a light coat of Renax GL1
(manufactured by Fuchs) to guide duct.
RA Removing and installing/replacing roofliner for glass slide/tilt sunroof
BMW AG - TIS
22.01.2013 08:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
