1 Series E81 130i (N52K) 3-door
Unclip cover (1).
Unscrew nuts (1). Tightening torque 61 12 4AZ
.
Remove battery positive cables.
Release locks (2) and remove frame (3) towards rear from B+
terminal.
Unclip B+ terminal and remove towards front.
Installation:
Make sure frame (3) engages correctly in B+ terminal.
RA Removing and installing/replacing engine compartment B+ terminal
BMW AG - TIS
22.01.2013 08:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
