1 Series E81 130i (N52K) 3-door
61 67 120
Removing and installing/replacing high-
pressure nozzle (housing) of headlight
washer system (M / aerodynamic kit) on left
Special tools required:
•
13 3 010
Necessary preliminary tasks:
•
Remove bumper trim
To prevent excessive escape of washer fluid, seal off end of high-
pressure line with special tool 13 3 010 .
Catch any escaping washer fluid if necessary.
RA Removing and installing/replacing high-pressure nozzle (housing) of headlight wa
BMW AG - TIS
22.01.2013 09:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
