bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
13 RA Removing And Installing_replacing Servodrive For Blending Flap (right, Automatic > < 12 RA Removing And Installing_replacing Servodrive For Blending Flap (left)

1 Series E81 130i (N52K) 3-door

Page 2
background image

Installation:

Make sure retainer (2) is correctly seated on left footwell heating
duct (1).

Insert left footwell heating duct (1) with adapter (3) in left rear
compartment heating duct (4).

Attach left footwell heating duct (1) in area (4) to heater/air
conditioner. Make sure assembly is locked exactly at point (5).

Unfasten plug connection (1) and disconnect.

Release screws (2).

Detach servodrive for blending flap (3) in direction of arrow from
heater/air conditioner (4). 

Installation:

Place servodrive for blending flap (3) over guide pin (5).

RA  Removing and installing/replacing servodrive for blending flap (left)

BMW AG - TIS

22.01.2013  09:39

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

13 RA Removing And Installing_replacing Servodrive For Blending Flap (right, Automatic > < 12 RA Removing And Installing_replacing Servodrive For Blending Flap (left)