1 Series E81 130i (N52K) 3-door
Release screw (1) on support tube (2).
Tightening torque 51 71 5AZ
.
Release screws (1) on support tube (2) from bracket (3).
Tightening torque 51 71 4AZ
.
Detach support tube (2) and remove from vehicle with assistance
of a second person.
Remove heater.
Installation:
Make sure heater (1) is correctly seated.
Installation:
Make sure condensate drain (1) is correctly seated in
grommet (2).
RA Removing and installing/replacing heater
BMW AG - TIS
22.01.2013 09:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
