1 Series E81 130i (N52K) 3-door
Insert special tool 00 9 340 as illustrated and unclip lower area
of control panel trim (1).
Insert special tool 00 9 340 as illustrated and unclip side section
of control panel (1).
Detach control panel (1) and disconnect plug connections.
Installation:
Make sure retaining clips (1) are fitted correctly.
If necessary, replace missing clips.
Note:
The centre console switch cluster (1) and the heater/air
conditioner operator unit (2) are connected via the ribbon
cable (4).
RA Removing and installing or replacing heater/air conditioner operator unit (versi
BMW AG - TIS
22.01.2013 09:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
