bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing_replacing Airbag Control Unit > < 1 RA Notes On Scrapping BMW Vehicles With Gas Generators (central Airbag Control Unit
Page 2
background image

parts.

Triggering

Triggering of the gas generators may only be carried out by expert personnel and under the supervision of a

responsible person. Other standard accident prevention regulations (safety goggles, ear defenders etc.) must also be
observed. 

The gas generators must be fired from the outside in the vehicle scheduled for scrapping with the doors closed but with
the tailgate, door windows and sunroof open. To fire the gas generators, use the BMW-developed triggering device
with the corresponding cables.

Warning!

Once gas generators have been fired, observe a ventilation period of 10 minutes with the doors opened. Only
then is it permitted to continue work inside the vehicle.

Wear protective goggles and protective gloves when handling a fired gas generator!

The burning of solid fuel will heat up airbag unit - danger of burning hands!

Wash skin with water after contact with fired gas generators!

1. Vehicles with central airbag control unit (all airbags, seat belt pretensioners, safety battery terminal)

 

1.1 Expose airbag control unit.

1.2 Connect "Airbagmaster". For subsequent procedure, refer to SEDA operating instructions.

RA  Notes on scrapping BMW vehicles with gas generators (central airbag control unit

BMW AG - TIS

22.01.2013  10:03

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

2 RA Removing And Installing_replacing Airbag Control Unit > < 1 RA Notes On Scrapping BMW Vehicles With Gas Generators (central Airbag Control Unit