1 Series E81 130i (N52K) 3-door
Release nuts (1) and unclip cable ties (2).
Disconnect plug connection (1).
Disconnect plug connections of aerial cables (1).
Remove TCU (2).
Replacement up to build date 03/2007:
Note:
TCU Everest is replaced from 03/2007 by TCU 1.5.
1.
Unclip cable holder (1) from TCU holder (2).
2.
Connect aerial leads according to new layout (new cable
routing as pictured)
3.
Secure cable holder (1) to TCU holder (2) with cable tie
RA Removing and installing/replacing telematics control unit (TCU) (option SA633/SA
BMW AG - TIS
22.01.2013 10:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
