1 Series E81 130i (N52K) 3-door
Release screw (1) between coil spring (2) and longitudinal
member (3). Remove small pressure plate (4) and large pressure
plate (5).
Installation:
Use pressure plate without nut.
Fit small pressure plate (4) according to its shape (6) into
pressure spring (2).
Tightening Torque,
refer to Technical Data 86 10 23AZ.
Installation:
Two persons are needed to install the coil spring correctly.
One person presses down the pressure plate (2) seated
inside the coil spring (1) and tightens the coil spring (1) /
trailing arm (3) screw connection. At the same time, the
second person levers the coil spring (1) with a screwdriver
into its correct seat.
Tightening Torque for coil spring (1)/trailing arm (3),
refer to Technical Data 86 10 22AZ.
RA Removing and installing or replacing left or right coil spring
BMW AG - TIS
22.01.2013 10:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
