1 Series E81 130i (N52K) 3-door
86 10 ...
Replacing 12 volt socket
From underside of platform, cut through cable tie (1) and remove.
Disconnect plug with grommet (2) from socket (3) towards bottom.
Installation:
Position all seals correctly. Also secure plug with grommet (2)
using new cable tie to other socket.
On upper side of platform, release Phillips screws (1) on mounting
bracket (2).
Remove sealing compound along white marking (1).
Installation:
Make sure cable is correctly laid.
Use Sikaflex 221 as sealing compound.
Grip under mounting bracket (1) with a screwdriver and lever out
bracket (1) towards top. Remove bracket (1).
RA Replacing 12 volt socket
BMW AG - TIS
22.01.2013 10:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
