1 Series E81 130i (N52K) 3-door
86 10 ...
Replacing lashing plate and lashing eye
Releasing lashing eye
Pull spring bar (1) upwards in direction of arrow A. Slide lashing
eye (3) in direction of arrow B and remove from lashing plate (2).
Release countersunk head screws (1) and remove lashing plate.
Installation:
Tightening torque,
refer to Technical Data 86 10 3AZ.
Locking lashing eye
Position lashing eye (1) on circular openings on lashing plate (2).
Press lashing eye (1) in direction of arrow A into lashing plate (2).
In this position, slide lashing eye (1) in direction of arrow B. Spring
bar (3) snaps in, anchors and secures lashing eye (1) in lashing
plate (2).
RA Replacing lashing plate and lashing eye
BMW AG - TIS
22.01.2013 10:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
