1 Series E81 130i (N52K) 3-door
Installation of "Progman" DVD (DISplus and GT1)
Before installation on DISplus or GT1, the Progman DVD must be installed on the
Before configuring DISplus/GT1 as the Progman terminal, the current DIS
software status must be installed on the units concerned (basic software and
programs). Please refer to the information printed on the Progman DVD.
"Administration", DIS "Update" must be used to install the "Progman" DVD.
The system will automatically restart after successful installation.
What to do in case of a fault occurring:
If the message "No DIS medium found. Fault number: -252" appears, an attempt
may have been made to install the "Progman" DVD with DIS "Installation". Use
DIS "Update" to install the "Progman" DVD.
If DIS "Update" is not active, the "Programs" DVD must first be installed.
All previously delivered "CIP" DVDs are superseded by the current "Progman" DVD.
It is essential to observe the described procedure.
IDC BMW SSS New installation specifications from Progman DVD version 20.0
BMW AG - TIS
Issue status (12/2007) Valid only until next DVD is issued
Page - 3 -