1 Series 128i (N52K) Coupe
33 32 021
Replacing left or right trailing arm
Note:
If the trailing arm is detached from the rear axle carrier/wheel
carrier, it is necessary after reinstallation to carry out a
wheel/chassis alignment check.
Release nuts (1, 3).
Unscrew bolts.
Remove trailing arm (2) downwards.
Installation:
Note insertion direction of bolts.
Replace self-locking nuts.
Tightening torque (on rear axle carrier) 33 32 1AZ
.
Tightening torque (on wheel carrier) 33 32 2AZ
.
After installation:
•
Perform chassis alignment check
RA Replacing left or right trailing arm
BMW AG - TIS
17.01.2013 17:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -