1 Series 128i (N52K) Coupe
Important!
Do not operate special tool 36 1 250 with an impact
screwdriver!
Remove dirt, grease residues and corrosion from contact face (1)
with a drill and special tool 36 1 250 .
Note:
Degrease contact face with universal cleaner, refer to BMW Parts
Service.
If there are grease residues in the area of the wheel stud bore,
the brake disc must be removed and cleaned.
Important!
Do not operate special tool 36 1 250 with an impact
screwdriver!
Remove dirt, grease residues and corrosion from contact face (1)
with a drill and special tool 36 1 250 .
Note:
Degrease contact face with universal cleaner, refer to BMW Parts
Service.
Check brake disc retaining bolt (1) for secure seating.
Important!
Mounting bolt (1) must not under any circumstances protrude
over contact surface (2) between brake disc and disc wheel.
Tightening torque brake disc retaining bolt:
Front axle 34 11 1AZ .
Rear axle 34 21 1AZ
.
Apply a thin coat of grease to wheel centering (1) in disc wheel.
Note:
Refer to BMW Service Operating Fluids, Main Group 36.
RA Removing or installing front or rear wheel
BMW AG - TIS
17.01.2013 17:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -