Removing and Installing RDC Trigger Transmitter - BMW 1 Series 128i (N52K) Coupe
36 11 121
Removing and installing/replacing an RDC
trigger transmitter (front)
Necessary preliminary tasks:
•
Partially detach front wheel arch trim
Press through studs (1) of expander rivets towards rear.
Remove trigger transmitter (2).
Installation:
If necessary, replace expander rivets.
After installation:
-
Carry out resetting of RDC
RA Removing and installing/replacing an RDC trigger transmitter (front)
BMW AG - TIS
17.01.2013 17:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
