1 Series 128i (N52K) Coupe
Cut wheel arch (1) along line (2) in radius.
Important!
Cut outer metal sheet only.
Preparation of new part:
Open weld joints in area (1).
Installation:
Position cut out metal section (2) on vehicle and weld.
Preparation of new part:
Mark new part in accordance with severance cut on vehicle +
20 mm extra material and cut (1).
Installation:
•
Adjust new part in conjunction with side panel to fit.
•
Attach new component from outside and weld.
•
Apply window glass adhesive to cavity acoustic baffle.
RA Replacing rear left outer wheel arch section (rear left side panel removed)
BMW AG - TIS
17.01.2013 18:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
