1 Series 128i (N52K) Coupe
Important!
Cut outer plate only for following severance cuts.
Measurement a = approx. 130 mm from edge of rectangular hole.
Measurement b = approx. 200 mm from centrepoint of 12 mm dia. bore.
Open weld joints in areas (1).
Installation:
Weld in reinforcing panels at all severance cuts.
Apply window glass adhesive to cavity acoustic baffles (2).
Installation:
Right side of vehicle only:
Drill through bracket (2) and support carrier (3) in area (1) and
MAG weld.
Mark severance cuts in accordance with specified measurements and cut.
Important!
Cut outer plate only for following severance cuts.
RA Replacing front left door pillar (front side panel removed)
BMW AG - TIS
17.01.2013 18:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -