1 Series 128i (N52K) Coupe
61 67 010
Removing and installing/replacing washer
pump of headlight washer system
Necessary preliminary tasks:
•
Release fluid reservoir for windscreen washer system and
pull out
Disconnect plug connection (1).
Note:
Catch any escaping washer fluid if necessary.
Open split pin (3) and detach hose (2) from washer pump of
headlight cleaning system (4).
If necessary, turn washer pump of headlight cleaning system (4)
and pull out of fluid reservoir for windscreen washer system (5).
Installation:
•
Replace strainer for washer pump of headlight washer
system.
•
Coat sealing ring of washer pump for headlight cleaning
system with antiseize agent.
•
Lay hose of washer pump for headlight cleaning system
without kinks
•
Fill fluid reservoir
RA Removing and installing/replacing washer pump of headlight washer system
BMW AG - TIS
17.01.2013 20:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -