1 Series 128i (N52K) Coupe
63 12 010
Removing and installing or replacing left
headlight (xenon headlight)
Warning!
Version with xenon headlights: Danger to life due to high
voltage! Therefore, before removing, disconnect all
components from the power supply (lighting system and
ignition off).
Work on the entire xenon lighting system (control unit, ignition
unit with bulb) may only be carried out by specialist personnel.
Follow instructions for handling light bulbs (exterior lights).
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove front bumper trim
Release screws (1). Tightening torque
63 12 4AZ
.
Release screw (2). Tightening torque
63 12 5AZ
.
Installation:
•
Observe gap dimensions
•
Adjust headlights
RA Removing and installing or replacing left headlight (xenon headlight)
BMW AG - TIS
17.01.2013 20:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -