1 Series 128i (N52K) Coupe
65 12 072
Removing and installing (replacing) amplifier
(Top hi-fi system)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove rear left side trim panel
Release screws (1) and remove retaining plate (2).
Disconnect plug connection (1).
Detach retaining plates (2) in direction of arrow.
Installation:
Make sure retaining plates (2) and grommet (3) are correctly
seated.
RA Removing and installing (replacing) amplifier (Top hi-fi system)
BMW AG - TIS
17.01.2013 21:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
