1 Series 128i (N52K) Coupe
65 77 580
Removing and installing seat position sensor
for left or right front seat
Warning!
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
•
Remove front seat
Cut through cable tie (1).
Release screw (2) and remove seat position sensor (3) from
seat rail.
Installation:
Replace cable tie (1).
Ensure correct cable routing (4).
RA Removing and installing seat position sensor for left or right front seat
BMW AG - TIS
17.01.2013 21:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -