1 Series 135is (N54) Coupe
13 62 531
Replacing coolant temperature sensor (N54)
Warning!
Danger of scalding!
Only perform these tasks on an engine that has cooled down.
Recycling
Catch and dispose of escaping oil and coolant.
Observe country-specific waste-disposal regulations.
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Remove acoustic cover
•
Remove fan cowl
Note:
Coolant temperature sensor is mounted on cylinder head at front.
Release screw.
Tightening torque 17 21 1AZ
.
Disconnect oil line (1).
Catch and dispose of emerging fluid.
RA Replacing coolant temperature sensor (N54)
BMW AG - TIS
18.01.2013 07:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
