1 Series 135is (N54) Coupe
Installation:
Replace sealing rings.
Unlock plug (1) and remove.
Release temperature sensor (2).
Installation:
Tightening torque 13 62 1AZ
.
If necessary, top up coolant.
Check cooling system for leaks.
Note:
After completion of work, check engine oil level.
Check stored fault messages.
Now clear the fault memory.
RA Replacing coolant temperature sensor (N54)
BMW AG - TIS
18.01.2013 07:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
