1 Series 135is (N54) Coupe
18 00 020
Removing and installing complete exhaust
system (N54)
Special tools required:
•
31 2 220
Warning!
Scalding hazard!
These tasks should only be carried out on an exhaust system
that has cooled down.
Important!
Removal of the exhaust system must be carried out with the
assistance of a second person.
Necessary preliminary tasks:
Remove tension strut
Support exhaust system with jack and special tool 31 2 220 and
secure against falling out.
Unscrew nuts.
Installation:
Replace self-locking nuts.
Replace seal.
Tightening torque 18 00 1AZ
.
RA Removing and installing complete exhaust system (N54)
BMW AG - TIS
18.01.2013 07:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -