1 Series 135is (N54) Coupe
51 71 038
Removing and installing/replacing front left or
right wheel arch cover (front section)
Note:
Prior to removing, pay attention to the exact installation position
with respect to the adjoining components.
Necessary preliminary tasks:
•
If necessary, remove left or right front wheel
Note:
The operation is described on the left side; proceed in the same
way for the right side.
Note:
Front axle removed for purposes of clarity.
Release screws (1).
Slacken nut (2).
Feed out front wheel arch cover (3) and if necessary disconnect
electrical plug connection.
Installation:
Make sure front wheel arch cover (3) is correctly seated.
Replacement:
•
Modify sheet nuts (1)
•
Modify cover (2)
Version with RDC:
•
Modify trigger transmitter
Installation:
If necessary, replace faulty metal nuts (1).
RA Removing and installing/replacing front left or right wheel arch cover (front se
BMW AG - TIS
18.01.2013 11:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
