1 Series E87 116i (N45) 5-door
Insert nuts and tighten down bearing bracket (1).
Tightening torque, 11 31 1AZ
.
Insert screw of chain guide (1) and tighten down.
Place special tool 11 7 252 on inlet camshaft and align inlet
camshaft so that special tool 11 7 252 rests without a gap on
cylinder head.
Fit special tool 11 7 251 on exhaust camshaft.
Turn back special tool 11 7 253 .
Hold inlet camshaft with special tool 11 7 251 so that it rests
without a gap on cylinder head.
RA Removing and installing/replacing inlet camshaft (N40 / N45)
BMW AG - TIS
16.01.2013 19:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
