1 Series E87 116i (N45) 5-door
51 24 146
Removing and installing/replacing button for
rear lid actuation
Necessary preliminary tasks:
•
Remove panel for rear lid
Disconnect plug connection (1) at microswitch.
Slacken screws (2) until retaining ring (3) can be turned.
Turn retaining ring (3) in direction of arrow and remove towards
bottom.
Remove button (1) in direction of arrow from rear lid (2).
Installation:
Seal (1) must not be damaged.
Perform function check with rear lid open.
Replacement:
Remove BMW badge.
RA Removing and installing/replacing button for rear lid actuation
BMW AG - TIS
17.01.2013 00:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -