1 Series E87 116i (N45T) 5-door
Installation:
Replace and lubricate O-rings (1 to 3).
Replace oil filter element (4).
Open plug (1).
Installation:
Replace sealing ring.
Tightening torque 11 13 1AZ
.
Pour in engine oil.
Start engine and run at idle until oil pressure warning lamp
goes out.
Note:
•
Park vehicle on a horizontal surface.
•
Allow engine at normal operating temperature to run for 3
minutes with increased revs (max. 1100 rpm).
•
Read off engine oil level in instrument cluster or on Control
Display.
RA BMW engine oil service incl. supplementary service (N45T)
BMW AG - TIS
17.01.2013 15:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -