1 Series E87 118d (M47T2) 5-door
Open cover in reinforcement plate.
Open oil drain plug (1).
Installation:
Replace sealing ring.
Tightening torque 11 13 1AZ
.
Fill system with engine oil.
Assemble vehicle and set down in horizontal position.
Start engine and run at idle until oil indicator lamp goes out.
Switch off engine, wait approx. 5 minutes and then check engine
oil level.
If necessary, top up engine oil.
RA BMW engine oil service (M47TU2)
BMW AG - TIS
18.01.2013 07:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -