1 Series E87 118d (M47T2) 5-door
Connect grounding cable (1) of special tool 13 0 200 to body
connection point (2).
Connect positive lead (4) of special tool 13 0 200 to jump start
connection point (3).
Release retaining ring (1) on injector.
Detach leakage oil line (2) in direction of arrow.
Connect OUT line of special tool 13 0 200 to leakage oil
line (1).
Connect IN line to injector and secure against falling out with
retaining ring.
Installation:
Check O-ring for damage, replace if necessary.
RA Checking injectors (without piezo-technology) with return flow quantity meter
BMW AG - TIS
18.01.2013 08:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -