1 Series E87 118d (M47T2) 5-door
18 31 040
Removing and installing/replacing primary
catalytic converter (M47TU2)
Necessary preliminary tasks:
•
Remove exhaust system
•
Remove front underbody protection
•
Unlock plug on lambda oxygen sensor and disconnect
Warning!
Scalding hazard!
Only perform these tasks on an engine that has cooled down.
Unscrew nuts (1).
Installation:
Tightening torque 18 00 2AZ
.
Release screw (2).
Installation:
Tightening torque 23 00 1AZ
.
Release screw (3).
Installation:
Tightening torque 23 00 1AZ
.
Remove holder (4).
RA Removing and installing/replacing primary catalytic converter (M47TU2)
BMW AG - TIS
18.01.2013 09:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
