1 Series E87 118d (M47T2) 5-door
64 11 262
Removing and installing/replacing auxiliary
water pump
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Recycling
Coolant emerges when coolant lines are detached. Have a
suitable collecting container ready.
Catch and dispose of emerging coolant.
Observe country-specific waste-disposal regulations.
Necessary preliminary tasks:
•
N45/N46 only:
Remove suction filter housing.
•
Disconnect coolant hoses from auxiliary water pump
Note:
Illustrations show a vehicle with an M47T2 engine.
Unfasten plug connection (1) and disconnect.
Release hose clamps (2) and detach coolant hoses (3) from
auxiliary water pump (4).
Installation:
Follow instructions for working on cooling system.
Fill and vent cooling system.
RA Removing and installing/replacing auxiliary water pump
BMW AG - TIS
18.01.2013 14:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
