1 Series E87 118d (M47T2) 5-door
Installation:
Fix drive plate (1) in position with special tool
64 1 090 .
Secure drive shaft with socket and torque wrench (2).
Tighten drive plate with tool in direction of arrow to tightening
torque 64 52 4AZ
.
Installation:
Install circlip (2) correctly in groove of pulley (1) and check for
correct seating.
3
Drive plate
RA Replacing drive plate for compressor (4-cylinder diesel engine)
BMW AG - TIS
18.01.2013 14:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
