1 Series E87 120d (N47) 5-door
Release screws (1).
Remove heat shield (2).
Release banjo bolt (1).
Note:
Catch escaping engine oil in a suitable container.
Disconnect line (2).
Tightening torque 11 42 2AZ
.
Installation:
Clean sealing surfaces.
Release screw (1).
Unfasten hose clip (3).
Remove return line (2).
Release screw (1).
Release screws (2).
Remove bracket (3).
RA Removing and installing or replacing exhaust turbocharger (N47)
BMW AG - TIS
22.01.2013 14:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -