1 Series E87 120d (N47) 5-door
12 41 041
Replacing solenoid switch
Turn off ignition.
Remove starter motor.
Release nut (1).
Remove cable lug (2).
Caution!
Do not turn cable lug (2) while tightening down - risk of
short circuit to starter motor housing.
Tightening torque, 12 41 4AZ.
Release screws (1).
Remove solenoid switch (1) and spring (2).
Unhook pin (3).
Installation:
Check pin (3) for wear and apply grease.
RA Replacing solenoid switch
BMW AG - TIS
22.01.2013 14:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -