1 Series E87 120d (N47) 5-door
![background image](/bmw/1_Series_E87/120d_N47_5-door/page-227003.png)
Release screws (1) and pull out injector wiring harness (2)
under high-pressure lines in direction of arrow.
Note:
Add final details to vehicle.
Read out fault memory of DDE control unit (DDE = Digital Diesel
Electronics).
Check stored fault messages.
Rectify faults.
Now clear the fault memory.
RA Replacing wiring harness section for injectors (N47)
BMW AG - TIS
22.01.2013 14:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -