1 Series E87 120d (N47) 5-door
![background image](/bmw/1_Series_E87/120d_N47_5-door/page-289002.png)
Unlock seal (1) in direction of arrow and remove.
Release screw.
Remove A/C condenser towards rear top from fixtures.
Carefully tilt condenser (1) in direction of engine, taking care not
to damage the condenser or lines in the process.
Note:
Lines of A/C system remain connected to condenser.
Pull cooling loop (2) of power steering out of module carrier and
remove.
RA Removing and installing/replacing cooling loop for power steering
BMW AG - TIS
22.01.2013 14:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -