1 Series E87 120d (N47) 5-door
Note:
Rear parcel shelf is shown removed for purposes of clarity.
Open weld joints in areas (1) and (2).
Note:
Rear parcel shelf is shown removed for purposes of clarity.
Open weld joints in area (1).
Installation:
Weld new component in areas (2) additionally.
Note:
Rear parcel shelf is shown removed for purposes of clarity.
Mark severance cut (1) centrally and cut.
Cut floor pan and cross-member underneath.
Open weld joints in area (2).
Preparation of new part:
Mark severance cut (1) in accordance with measurement and
cut.
Important!
Cut outer metal sheet only.
Measurement a=170 mm
Measurement b = 110 mm
Installation:
Weld in reinforcement plates at severance cuts.
RA Replacing luggage compartment floor (complete with left or right inner wheel arc
BMW AG - TIS
22.01.2013 17:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -