1 Series E87 120d (N47) 5-door
51 12 156
Removing and installing (or replacing as from
03/2007) rear bumper panel
Necessary preliminary tasks:
•
Remove both rear lights.
•
Remove license plate lights
Release screws (1) on wheel arch trim (2) on left/right.
Installation:
Make sure wheel arch trim (2) is in correct position.
Release screws (1) on bumper trim (2).
Unclip bumper panel (1) sideways on left/right in direction of
arrow.
Installation:
Ensure guide (2) is correctly seated.
Bumper panel (1) must be fitted correctly in side bracket in area
(A).
RA Removing and installing (or replacing as from 03/2007) rear bumper panel
BMW AG - TIS
22.01.2013 17:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -