1 Series E87 120d (N47) 5-door
Unclip bumper panel (1) in direction of arrow.
If necessary, disconnect plug connections for ultrasonic
transducers (2).
Remove bumper trim (1) with aid of a second person.
Installation:
Catches (1) and guide (2) must not be damaged.
If necessary, replace faulty sheet nuts (3) on left/right.
Replacement:
•
Remove body moulding.
•
Remove towing eye cover
RA Removing and installing (or replacing as from 03/2007) rear bumper panel
BMW AG - TIS
22.01.2013 17:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -